How to Recover Data from Damaged Hard Drive 

Avatar for Mia
recover data from damaged hard drive

Good dead hard drive recovery software can recover data and restore damaged disks. In case of system failure or startup issues, WinfrGUI recovers data. This program can recover data from damaged hard drive.

These basic methods will start file recovery from a damaged hard disk:

  • Set up WinfrGUI.
  • Select the hard drive and click Scan.
  • Check the files to restore and click “Recover”.
  • If your hard disk stops responding, makes “biz biz” sounds when booted, and eventually shuts off, it may have died.

The presence of strange sounds, frequent computer crashes, problems with the disk, loss of data, and problems identifying drivers are all signs that the hard drive is dead.

Don worry about these indications. Let’s see how to recover data from dead hard drives using these following approaches. 

Part 1: Possible Ways to Get Data Back from a Dead Hard Drive

Every single person who uses a computer ends up with dead hard drives. Losing photos, music, papers, and important items is upsetting. Hope remains till the file is not severely damaged. That’s why I suggest to have a plan B. You can get your data back by setting from a CD or DVD that has hard disk recovery software on it if you haven’t already and the drive parts are still working.

Quick Tip: Ensure the disk is online and the partition or disk space is accurately shown. If not identified as an online drive, check section 3.

Part 2: Data recovery from dead hard drives

WinfrGUI can recover data after system or boot failure. Below are ways to restore data from dead hard drives:

  • Step one. Select the scan range and file reset location.
  • Step two. Choose scan mode and file type in “Advanced Settings”
  • Step three. Complete the process by clicking “Start Recovery”.

This free software could help to retrieve data from dead hard disks, external hard drives, dynamics, memory cards, and other storage mediaI. It could also recover deleted data from partitions, recover previous versions of excel file as well as images, documents, video files..

Part 3: Handling hard disk internet connectivity issues

If your hard disk isn’t “online” Try all potential occurrences and replies that always work.

Case 1. The hard drive says “ONLINE (ERRORS)”

Dynamic drives display “online (error)” if I/O fails. The majority of disk files are “in danger.” For acquisition:

If the I/O error is a loose wire or short circuit, restart the disk.

Step 2: The disk is damaged if it remains “Healthy (At Risk)”. Buy a new disk and backup your data immediately.

Case 2: hard disk “Not initialized”

“Unstarted” CDs have no virus or signature. For acquisition:

First, check other PC hard drives. Start a boot if none exists.

Right-click the disk and press “Start Disk”. The disk’s “online” component follows “start”.

Case 3: The hard drive is “missing.”

When the disk is damaged, switched off, or removed, the “missing” notice appears. Launch “Disk Management” to activate a new disk.

Right-clicking a missing disk should display “Open disks again”.

Several missing disks will cause the disk management system to restart the drives.

Case 4: The Disk Is Showing  “Foreign”

Move a changing file from another machine to yours to make it look “foreign” If you have Windows XP Home Edition with dual boot and dynamic files, this may happen. Bringing the disk in requires pressing.

Use “Import Foreign Disk” to do this. Data on the disk will not be lost when brought in. 

Part 4: How to fix hard drives that are broken or dead

Check out the following solutions to fix your hard drive if it breaks. 

Solution 1: Get your disks fixed.

You could hurt your disk if it has bad spots or mistakes on it. This will be fixed right away if you run the CHKDSK tool on your PC. How to fix a hard drive that won’t work:

  • Press Win+X to get to “Command Prompt (Admin)”.
  • For the Command Prompt to appear, click “Yes” as an administrator.
  • If your hard drive is broken, use “chkdsk” and “Enter” to look for mistakes.
  • Just print “chkdsk c: /f /r /x” and change “C” to the drive letter of the broken hard drive.

Solution 2: Fix broken non-system drives with a file manager.

  • Press “Win + E” to open the file manager, then right-click on the drive in the list on the left.
  • Select “Tools” > “Error Check” from the “Properties” menu.
  • To fix the driver problem, click “Repair this drive” after the check is done.

Solution 3: Run a full disc scan.

  • Get “This PC” open. Right-click on the hard drive and select “Properties.”
  • Click on “Check” under “Tools” and “Error Check.”
  • “Start” and “Check Local Disk” Turn off all of your apps and let the system scan the disk when it starts up. After that, turn your PC back on.

It’s okay if the report says “bad sector or group.” Use the CHKDSK command from Solution 1 to fix this.


It could be difficult to recover data from damaged hard drive. Before you hire someone to fix the problem, try the methods we mentioned above, and look for a cheaper way to do it. As soon as you fix the old hard drive and get your info back, you should get a new one. Damaged hard drives are not safe to your data.