6 Ways to Resolve SD Card Read Errors
Are you disappointed with the memory card error? Don’t worry. We are here to help you solve the problem so that you can work smoothly with your files. SD cards are very useful in digital devices such as cameras and Android phones. However, it is important to remember that they are electronic storage devices and may encounter errors. In this article we will provide tips and solutions to fix SD card errors by following these instructions. You will be ready to deal with any problems that may arise. So let us start without delay.
Part 1: Solution for error of memory card or SD card
Problem 1: The SD card was unexpectedly removed.
If you encounter an error message “SD card unexpectedly removed” on your Android device, it can be confusing. This error often occurs when the card is not connected to a port securely or if the card has been infected with a virus. To solve this problem, you can try the following solutions:
Solution 1: Remove and install SD card
- Go to “Settings” on your device and open “Save”
- Scroll down and select the “Uninstall SD Card” option. Confirm by pressing “OK”.
- Remove the SD card and turn off your device.
- Reload the SD card and use power on your device.
- Go to “Settings”, then go to”Save” and click on “Install SD Card”.
Solution 2: SD card format
If the above-mentioned solution does not work, you can format your SD card to fix the error. Keep in mind that formatting will delete all data on your SD Card, so make sure to back up your important data before proceeding.
Problem 2: The memory card is still being formatted.
If your SD card still asks you to format it, it may show an unknown error. To fix this problem, follow these steps:
- Connect your SD card to another device or PC to check if there is a problem with the card or device you are using.
- If the SD card is running on another device then the problem is your startup device.
Problem 3: The SD card is damaged. Try changing format.
When you receive the message “SD Card is Damaged. Try Reformatting It.” You may be doubtful to proceed with formatting as it will delete all data on your SD card. To avoid this, you can try the following solution:
Solution 1: Do some inspection.
Check that your SD card is dirty and clean if necessary. Additionally, make sure that the SD card has been properly connected to the slot card.
Solution 2: Reboot your device.
If the problem continues to occur, please try rebooting your device. Sometimes, incomplete background operation may cause the SD card to be temporarily unreadable. Rebooting may solve the problem.
Problem 4: Read/write error on SD card
A reading/writing error on your SD card may indicate that it is being protected from writing, making it impossible to change files. This error may be caused by factors such as a bad virus leak, corrupted disk structure, or incorrect management of the SD card. Here are the solutions to overcome this error:
Solution 1: Basic checks.
Check that the SD card is working on other devices. To rule out compatibility issues. Also check the card reader and device drivers to make sure they work properly. Finally, check the USB cable for any defects.
Solution 2: Remove Write Protection
If your SD card has written protection, remove it from the device and find the lock switch on the left side of the card. Drag it up to turn off writing protection. If there is no locking switch, you can use the PC and Diskpart command tool to remove the only readable properties of the SD card.
Problem 5: Unknown memory card.
If your system or phone can’t recognize your SD card, please follow these steps:
Solution 1: Clean the SD card.
If the SD card contains dust, clean it before putting it into your device.
Solution 2: Test the SD card.
Connect your SD card to another PC to check if the card is defective. If it works on another PC, the problem is elsewhere. Otherwise, you will need to replace the SD card.
Problem 6: Empty SD card
If you encounter a “Blank SD Card” alert, try the following solution:
Solution 1: Reboot your device.
Restarting your device can help solve this problem. Restart your device and check if the problem continues to occur.
Solution 2: Use chkdsk
Connect your SD card to your PC and use the chkdsk command in the command instructions. This will help check for any errors and fix them.
Part 2: Tips to Prevent Errors and Damage of Memory Cards
To avoid errors and damage of memory cards, pay attention to these tips:
- Correctly remove and unload your card: Always remove your SD card from your device correctly and turn off the device before removing the card. This prevents damage to the slot card and reduces the chances of unexpected errors.
- Limit card use to one device: Avoid using the same SD card on multiple devices to prevent possible virus infection and error.
- Using a high quality card reader: Make sure you use a reliable Card Reader when connecting an SD card to a computer. Using an unauthorized or poor quality card Reader may cause SD card errors.
- Avoid emergency shutdowns: Do not suddenly shut down your computer or laptop when using an SD card. This prevents memory card errors.
- Keep infected information out of the card: Avoid saving infected or malware information on your SD card to prevent errors and data damage.
- Avoid low battery usage: Do not use your SD card on devices with low batteries to reduce the risk of SD card error.
Bonus Tip: Recovering lost data caused by error of SD card
In case you lose data due to an SD card error, we recommend using a reliable data recovery tool such as WinfrGUI. This tool is designed to help you recover your lost data and has the ability to view recovered files before recovering them. With Windows and Mac versions available to different operating system users.
Main Properties of WinfrGUI
- Supports a wide range of storage media devices and fixes SD card reading errors easily.
- Guaranteed high quality recovery results without risking data integrity.
- Receive various types of information, including audio and video.
- Reliable by many users with high success rates.
- Compatible with over 1000 file formats including FAT.
- The user-friendly interface is suitable for users of all technical levels.
Recovering data from SD card using WinfrGUI
- Step 1: Download and install WinfrGUI on your PC. Enter your SD card into the card reader and connect to your computer.
- Step 2: Open the application and select the SD card as the target location. Click on the “Start” button to start the scan process.
- Step 3: Watch out for the scanned file. If you find the file you want, you can stop or stop the scanning process.
- Step 4: Search and view the desired file in the results. When satisfied, click on the “Recover” button and save the recovered file to a different location to avoid duplication.
Conclusion
SD card errors can be disappointing, especially when you have important information stored on the card. By following the solutions and tips provided, you can efficiently fix SD card bugs and reduce the chances of finding them in the future. Also, if you have ever encountered data loss due to SD card error. Tools like WinfrGUI can help you recover missing files. Be prepared and confident to deal with any SD card problems. Thanks for reading and don’t hesitate to share your thoughts and views with us.
FAQ of SD Card Read Errors
Q: Why does my SD card show an error and how can I fix it?
A: The error of the SD card may occur due to various factors such as file system damage, physical damage or improper use. To fix the error of SD card, you can try following the following steps: Check that the anti-writing switch on the SD Card is enabled. If so, turn it off. Use different card readers or USB ports to make sure the problem is not in the reader or port. Run a disk error detection tool such as chkdsk (Windows) or Disk Utility (Mac) to scan and repair errors in the file system on the SD card. If there is no solution, the above works. Please consider formatting an SD card or using special data recovery software.
Q: My computer asks me to format the SD card when I put it in. What should I do?
A: When your computer asks you to format an SD card when inserted, it may indicate that the file system is corrupt or readable. Before formatting, try these steps: Place the SD card in a card reader or other device to verify that the problem belongs to the Card Reader. Use data recovery software to recover important files from SD card before attempting any repairs or formatting. If you have confirmed that the recovery is not necessary, you can perform SD card formatting so that it can be used again. Note, however, that formatting will delete all data on the card.
>>Also Read: 6 Ways to Fix SD Card Write Protect Error With Ease