How to Perform Pen Drive Data Recovery After Format

Avatar for Mia
By  
pen drive data recovery after format

Recovering data from a formatted USB flash drive can be a common challenge. USB flash drives are typically formatting more often than other storage devices because they are often used for temporary transfer and storage. Unfortunately, this increases the risk of mistaken deletion or loss of important files.

But don’t worry! Learning how to recover files from a form USB drive is not only possible but also easy. In this article we will briefly explain what happens when you format a USB drive and give you the necessary skills and tools to effectively recover lost data.

To increase the chances of successful recovery. It is most important to stop using formatted USB drives immediately. Keeping saving or transferring files to drives can overwrite lost data, making recovery much harder if not impossible.

Part 1. Formatted Drive: What Happened to My USB Driver?

When you format a USB drive, you reset its file system as a principle, making storage space ready for new data. The impact on your data depends on the format done:

  • Quick format: This is similar to removing an index from a book. It removes an index or file system allocation table, which is a map that tells your operating system that the file is stored on a drive. After a quick formatting, the system will see the drive as “empty” because the index is missing, but the actual information remains on the drive. The data saved on a USB flash drive that was formatted using a fast formatting method can be recovered.
  • Full format: On the other hand, the full format will go one step further. It not only deletes the index but also passes through every “page” of the deleted drive or saves data. This is like tearing every page of the book and leaving you with an empty page. In some cases, a full format may scan the drive for bad sectors. Unfortunately, full format method makes data recovery impossible unless you have a backup to recover from.

It is important to fix a common situation that many users face – the “USB Drive Not Formatted” error. This error occurs when your operating system can’t recognize your USB drive’s file system because it’s damaged, incompatible or not. While this text may suggest that your drive has to be formatted. Doing so will delete all existing data, making recovery efforts more difficult.

Part 2. How to Do Pen Drive Data Recovery After Format

In this section we will introduce you through the steps to recover files from USB drives. The form uses reliable recovery software and tested techniques. Let’s start!

Solution 1: Data Recovery Software

The data recovery software can recover lost data even from a formatted USB drive by accessing a low-level driver and scanning it to see the rest of the deleted files. WinfrGUI. The USB Recovery Tool is a recommended option as it has several significant advantages:

  • Running on Windows: You can use WinfrGUI to recover data from USB flash drive form in Windows.
  • USB flash drive compatibility: WinfrGUI can recover data from all widely used USB flash file systems including FAT16/FAT32/exFAT, NTFS,NTFS5, EXT2/EXT3/EXT4 and BTRFS. It can handle RAW flash drives without any file system.
  • Scan results sorted in order: The software categorizes the scan results as deleted files, exists and re-creates with advanced filters for easier search.
  • Extensive RAW file support: This tool is powerful in detecting a wide variety of RAW images and videos and supports about 400 image file formats in total.
  • Free Data Recovery: The Windows version of WinfrGUI features up to 500 MB free data recovery, allowing users to test the capabilities of the software before purchasing.

To perform pen drive data recovery after format using WinfrGUI, follow the following steps:

  • Download and install WinfrGUI on your Windows computer
  • Connect a formatted USB drive to your computer and start WinfrGUI. Select your USB drive from the list of storage devices and click on the “Find Lost Information” button.
  • Allow WinfrGUI to run and scan, depending on the size of your flash drive. The scan may take a long time. You can stop scanning at any time, and check the items found while the scan remains in the background.
  • Analyze the scan results and add each file you want to recover to your recovery stand by clicking on the address box behind it. Use WinfrGUI’s scan effect filter to quickly find what you’re looking for. Check the files first to check their completeness and content.
  • After selecting the file to be recovered, click on “Recover” and select a location where to store the file that has been restored. Be careful not to select a target on the same drive you are recovering. WinfrGUI will recover files from your form USB flash drive to the selected location.

Solution 2: Using CMD to Perform Pen Drive Data Recovery After Format

The command letter (CMD) in Windows has several data recovery options. You can use the CMD to uncover hidden files and repair damaged USB flash drives. Here are two useful commands:

Uncover hidden files using the ATTRIB command: If your USB flash drive seems to have been formatted even though you can’t remember its formatting. It’s possible that all files have properties that change, keeping them hidden from view. You can uncover them using the CMD command as follows:

Properties -h-r-s/s/d I: *.* (replace “I” with the letter assigned to your USB flash drive)

Repairing USB flash drives using CHKDSK: Sometimes, a damaged USB flash drive seems to be formatted because there are no stored files they can access. You can use the CHKdSK tool to repair the drive with the following command:

chkdsk I: / r (replace “I” with the letter assigned to your USB flash drive)

Solution 3: Professional Data Recovery Service

While DIY data recovery solutions are useful, inexpensive and fast, there are situations where it is best to hire specialists with special equipment and experience. Think of professional information recovery services in the following cases:

The USB flash drive is physically damaged and unrecognizable by your computer.

Formatting problems come along with hardware problems such as unknown USB drives, improper sound or damaged components. Data recovery software is effective in these cases and requires professional service.

Very important files were stored on USB flash drives. The form and loss of them would be more expensive than hiring a professional data recovery center.

The best professional data recovery center provides free data evaluation to ensure that you do not waste your money without giving your data back. To start the recovery process, select a data recovering center with a high success rate, prepare your USB flash drive for shipping in a protective bag with proper protection and wait for an expert evaluation. The pen drive data recovery after format service will start after you have received the approval of the quotation and you will receive all the recovered data on new USB flash drives or other storage devices as agreed.

Part 3. What is the “USB drive not formatted” error?

For your computer to read data from a USB drive, the driver must be formatted with the file system supported by your operating system. When a USB driver without a file system is formatting with an incompatible file system, or the filesystem is corrupted, you may encounter an “USB Drive Not Formatted” error. This error indicates that the computer cannot record the drive’s format and cannot read the information stored therein.

It is important to note that while errors indicate that there are problems accessing the data, the files themselves are often still on the drive. They are inaccessible because the system cannot navigate the file structure of the drives. It is recommended to avoid formatting which deletes all data. Until the data recovery is carried out and the important files are transferred to a secure location. Alternatively, you can try fixing the error using the methods listed below.

Part 4. How to fix “USB drive not formatted” error

When you encounter the “USB Drive Not Formatted” error, do not click the Disk Format option if you are sure that the drive contains valuable information. Instead, try solving the following problem:

Try a different operating system.

Sometimes the error is caused by the compatibility of a specific file system of your current operating system. Connecting a USB drive to a computer running another operational system (Windows, macOS, or Linux) may solve the problem. Each OS has its own set of compatible file systems. As described earlier. If other operating systems recognize the drive’s file system, you can copy your information to a secure location from there.

Use WinfrGUI for data recovery

WinfrGUI is a powerful data recovery tool that can recover data from RAW drives by recognizing files based on their signals instead of relying only on file system metadata. It is an excellent solution for fixing “USB Drive not Formatted” errors.

Conclusion

To perform pen drive data recovery after format  is not as challenging as it seems. With the help of a data recovery tool such as WinfrGUI, you can easily recover files from a faulty, corrupted, or corrupted formattable flash drive. Do not let the stress of a formatting error – the information stored therein can still be recovered.

FAQ

What is the difference between USB flash drive and pen driver?

The terms “USB flash drive” and “Pen drives” are used together to describe small portable storage devices that are connected to a computer via a USB port. They both refer to the same type of device – a compact flash memory storage mechanism used to record, transfer and transport files from one computer to another.

How can I do pen drive data recovery after format without using software?

If you back up the contents of your USB drive to another official location such as a cloud storage service or another external driver, you can easily recover your files from there. However, if you haven’t backed up your data yet, the most effective option to restore your files is by using special data recovery software such as WinfrGUI.

>>Also Read: How to Recover Formatted Partition Windows 10